Gain the skills to allow you to be JOB READY
ENROL NOW

The Program

Total Management and Training have carefully selected a combination of training courses to provide job seekers with the best possible chance of gaining employment in the future.

Trained by our highly qualified and experienced trainers, the courses will develop the skills required for individuals to work in a variety of industries.

This is a week long program, and by the 5th day, participants will have achieved:

1. White Card  (Work Safely in the Construction Industry - accredited course)

2. Yellow Card  (Operate EWP induction training - non-accredited course)

3. Working Safely at Heights   (accredited course)

4. Remove Non Friable Asbestos  (accredited course)

5. Confined Space Entry  (accredited course)

 

Cost of the program is $990 per person for the five days of training.

We require a minimum of 8 people to run the program, so please contact our friendly staff if you have a group you wish to enrol into this program. Maximum attendees per program - 15 participants.

 

The Courses

White Card

CPCCOHS1001A Work safely in the construction industry

Topics covered in this training:

  • Apply basic risk management concepts
  • Read, interpret and apply all safety instructions
  • Identify and follow standard work procedures
  • Report hazards and potential emergencies
  • Determine roles, rights and responsibilities
  • Understand WHS  incident response

 

Yellow Card

Non-accredited, however approved by the Elevating Work Platform Association of Australia

Topics covered in this training:

  • Pre-start safety checks and use of log book
  • Working around power-lines and in the wind
  • Safety harnesses and emergency descent system
  • Operators manuals and compliance plates
  • Planning and preparing for work
  • Setting up, operating and shutting down

 

Work Safely at Heights

RIIWHS204D Work safely at heights

Topics covered in this training:

  • Plan and prepare for safe work practice
  • Introduction to fall protection equipment
  • Select and inspect equipment
  • Safe work with ladders and roofs
  • Emergency response and rescue requirements
  • Conclude work at heights operations

 

Asbestos Removal

CPCCDE3014A Remove non-friable asbestos

Topics covered in this training:

  • Prepare for asbestos removal
  • Prepare removal area and isolate
  • Carry out asbestos removal process
  • Carry out decontamination process
  • Clean up work site
  • Understand regulatory documentation

 

Confined Space Entry

RIIWHS202D Enter and work in confined spaces

Topics covered in this training

  • Identify scope of permits to work
  • Use safety equipment and PPE
  • Apply risk management concepts
  • Enter and control confined space work
  • Emergency response and equipment
  • Conclude confined space operations

 

Further information about the courses may also be found on our website, under the Training menu.

 

The Price

Cost of the program is $990 per person for the five days of training*.

This is a full week, discounted program. For those who only wish to undertake selected courses during the week, that is possible, however the full price for each selected course will be payable - please see individual course outlines on our website for stand-alone course pricing. Those booking a full week program are entitled to 10% off other public courses on our training calendar, as long as the courses are booked and paid for at the same time as the Job Ready Program.

Once enrolled in the program, the full amount is payable. Cancellations may be received 10 working days prior to the program with no penalty. Cancellations received within 10 working days of the program commencement date, or no shows during the week of the program, will not receive a refund.

 

Important Information

Please note participants must have a USI number at the time of enrolment. 

Each participant will require a safety helmet, work clothing, safety footwear, gloves and eye protection.

 

Additional Costs and Expenses

Training is conducted at our training facility in Cairns. Where the training is to be conducted on-site, which is outside the immediate Cairns area, then additional costs will be applicable. Any airfares, travel, accommodation, meals and materials freight incurred in the provision of this training will be on-charged. Mileage will be charged at 80c (plus GST) per kilometre and traveling time will be charged at our standard rates. Please contact us for a formal quotation for courses conducted outside of Cairns.

 

How to Schedule a Course

Contact our office if you would like to schedule a dedicated course for your organisation, or for your clientele. Dates will be confirmed upon payment of course.

Please note we require a minimum of 8 participants to run a course. Maximum numbers per course is 15 participants. Where a course is booked and minimum numbers are not met, the booking organisation will be required to pay the difference in price. 

 

ENROL NOW

© Total Management and Training 2018 - RTO #31178

web design by precedence